Siemens 2 D SP, 2 P manual Fitting an audio shoe, Switching off instrument with audio shoe

Audio input

Your hearing instruments are equipped with an audio input. This enables the connection between hearing instrument and accessories. It helps you to understand better in certain hearing situations.

Fitting an audio shoe

Open the battery compartment up to the first stop, open the flap under the 1-T-2 switch, hook the audio shoe in from the front and press it to the rear into the detent on the inner curved piece.

Switching off instrument with audio shoe

Press the audio shoe to the rear, up to the first stop.

2 D SP

Removing the audio shoe Press the audio shoe to the front, unhook the audio shoe and close the flap again.

Safety instructions for hearing instruments with audio input

The audio input may be connected to line-operated equipment only if this fulfils at least the safety requirements of IEC 65 / DIN VDE 0860.

21