Putting into service

Charging the batteries

Batteries supplied are not charged.

Note:

lNew batteries should be initially charged for a minimum period of 16 hours without interruption – irrespective of any messages on the display.

lIn order to maintain max. battery storage capacity for as long as possible, the mobile unit should only ever be inserted in the charging shell when the batteries are empty.

lThe batteries warm up during charging.

lYou can also use the charging shells or base stations of a Gigaset 900/ 1000 for charging the mobile unit.

lOnly the following spare batteries are permitted:

Panasonic P-60 AA, Philips R6 NC-P, Saft RC6, UCAR RC6, DAIMON ACCU 1000, Varta 751RS, Sanyo N-3UN and N-3UC.

lInsert the mobile unit in the Gigaset 1000L charging shell to charge the batteries. The mobile unit can be inserted with the display facing

upwards or downwards.

The left LED Bon the charging shell lights up while the batteries are charging.

Charging times:

Batteries in the mobile unit: 4 - 5 hours

Replacement batteries in the reserve compartment of the charging shell: 20 - 24 hours

Battery life:

These times are only achieved after several charging and discharging cycles.

36 hours in stand-by mode

4 hours when phone is in use.

16

Page 16
Image 16
Siemens 300E operating instructions Charging the batteries, Charging times, Battery life