50
Appendix
Gigaset 4015 Classic, GBR, A31008-G4015-J101-1-7619 anha.fm 14.09.01
Guarantee
Over the guarantee period from the date of purchase from the stock-
ist, Siemens AG will rectify all material or manufacturing defects by
repairing or replacing the defective device.
As of 01.01.2002, the European guarantee period will be 12 months.
The guarantee does not cover damage caused by improper use, wear
and tear or third party access. The guarantee shall not cover consum-
ables or defects which only slightly decrease the value or serviceability
of the device.
The ringer/dialling
tone cannot be
heard.
You have changed
the telephone cord
on your Gigaset.
Ensure, when purchasing
a new cord, that it has
the correct pin assign-
ment (see page 6).
Error beep is
generated
(descending tone
sequence)
Wrong input Repeat the procedure;
note the display and, if
necessary, refer to the
operating instructions.
The answering ma-
chine announces
PIN is incorrect
during remote
operation.
The system PIN
entered is incorrect.
Re-enter the system PIN.
The answering
machine does not
record any mes-
sages, announce-
ments or infotexts
Memory is full Delete old messages
Play back and delete
new messages
An answering
machine message
does not have a
time stamp
The date/time not
set
Set the date/time
Fault Possible cause Solution