Siemens 4100 Install Line Filters, Verify that the following items came with your DSL kit

Before you begin,

Verify that the following items came with your DSL kit:

Step 1 >

Install Line Filters

		1	SpeedStream® Device
		2	Documentation
1		3	Software Manual CD-ROM
		2	(Router model only)
		4	Power supply
		5	RJ-45 Straight-through
			Ethernet cable
3	4	6	RJ-11 DSL cable

56

Stand-alone Line Filter

1

2

3

Wall-mount Filter

Devices such as fax machines, caller ID boxes, or phones that share the same phone line as your DSL account require a line filter, which prevents noise from disrupting the DSL signal on the phone line. Filters can be in the form of a stand-alone line filter or a wall-mount filter.

Stand-alone Line Filter

For each device that shares the DSL phone line:

1.Unplug the device’s cord from the phone jack.

2.Plug the filter into the phone jack.

3.Plug the phone cord (or other device cord) into the filter.

Your service provider may include an Ethernet adapter, a line filter, and a wall-mount filter in your DSL kit. If you received any of these items, follow the instructions provided in this guide for basic installation. If you need further assistance installing these items, please contact your service provider.

A	PCI Ethernet adapter
B	Line filter(s)
C	Wall-mount filter	B
	A		C

			Wall-mount Filter
			For a wall-mount phone, install a
1	2	3	wall-mount filter.

1. Remove the phone.

2. Connect the wall-mount filter to the wall plate.

3. Reconnect the phone.

2 3