Siemens 410 S, 420 S - page 10

Basic Configuration of optiPoint Telephones
30. June 2006
10 optiPoint 410/420 - Using with Asterisk, Configuration Guide
c01.fm
Web Interface
General Information
This section contains general information about the telephone, e.g. software release or MAC
address.
Network IP and routing
In this section the IP settings are entered. If DHCP is supported within the network, no changes
should be necessary here. During the first setup of the optiPoint telephone without DHCP these
settings have to be entered via the local Administrator Menu in the telephone (optiGuide) as
follows:
1. Press the right arrow key and enter the numbers 1,3 in idle mode.
2. Enter the administrator password.