Replacing the Power Supply | 9200 Power Supply Retrofit Instructions |
|
|
Replacing the Power Supply
DANGER
Installation and maintenance of ACCESS meters and meter options should only be performed by qualified personnel that have appropriate training and experience with high voltage/current devices. Refer to Installation Considerations, and the Danger, Warning, and Limitation of Liability notices in the 9200 Installation and Operation Guide.
1.Turn off all power to the meter.
2.Ensure that all cables still connected to the meter are not live.
3.Ensure that the Line and Neutral (or DC power) wires to the power supply inputs of the meter are not live (if you are replacing an existing power supply).
4.Fit the power supply
NOTE
All 9200 power supply models are installed the same way; the diagram for the 480V power supply is included to show the greater depth dimension of that model.
5.Tighten the two (captive) screws until the power supply fits snugly against the meter. Do not overtighten the screws.
Plugging in the Power Supply
Power supply |
| 9200 meter plug- | ||
| in port | |||
|
|
|
|
|
|
|
|
|
|
Captive screw
Front of the power supply
Captive screw
Page 2
