size of the cookware.
CONNECTING / TURNING ON THE DOUBLE AND TRIPLE CIRCUIT HEA- TING ELEMENTS
1 Choose the desired power level (from 1 to 9) using the cursor.
2 Touch the double ring sensor button 
(6)to activate the second circuit. Indica- tor light (10) will turn on, which indicates that the outer ring is activated.
3 In model TRX 635, if you want to activa- te the third ring after turning the second
ring on, the touch sensor button 
(6) again. After doing so, the second indica- tor light will turn on.
DISCONNECTING / TURNING OFF THE DOUBLE CIRCUIT
1 Touch the double ring sensor button 
(6). The indicator light (10) will turn off and the outer ring will be disconnected.
DISCONNECTING / TURNING OFF THE TRIPLE CIRCUIT (MODEL TRX 635)
1 Touch the sensor button 
(6). The second indicator light (10) will turn off and the third ring will be disconnected.
2 Touch the sensor button 
(6) again. The first indicator light (10) and the second ring will be disconnected. Only the first circuit will be activated.
Energy supplied according to
the power level chosen
Please remember that the heating elements adjust the energy supplied according to the size and type (material) of the cookware being used. Smaller cook- ware will receive less energy than larger
GB
cookware.
Cookware detection
(models IRX… and IQX...)
The induction cooking zones have an incorporated cookware detector. This will prevent the heating element from working if there is no cookware placed on it or if the cookware is inadequate.
The power indicator will show the symbol meaning that "there is no cookware" 
if no cookware is detected when the zone is on or if the cookware is inadequate.
If the cookware is taken off of the cooking zone while the zone is functioning, the heating element will automatically stop supplying energy and the "there is no cookware" 
symbol will go on. When the cookware is once again placed on the coo- king zone, energy will once again be sup- plied at the power level that was chosen.
The cookware detection time is 10 minu- tes. If no cookware is placed on the zone during this time, or if the cookware is inadequate, the cooking zone will deacti- vate. The power indicator will show the symbol "there is no cookware" or 0.
After use, disconnect the cooking zone by using the touch control panel. Otherwise, an undesired operation could occur in the cooking zone if a piece of cookware is accidentally pla- ced on the cooking zone during the following 10 minutes. Avoid possible accidents!
Recovery Function
(models IRX… and IQX...)
If the touch control panel has been turned off by mistake, the Recovery Function makes it possible to quickly recover all of
23
