GB

Unlocking to cook

To unlock the control and use the applian- ce, follow these steps:

1 Touch the Power sensor button (6) and the sensor button of the front right heating element (3) at the same time.

The L will disappear from the indicators and a 0 with a flashing decimal point (11) will appear, or an H will appear if the corresponding heating element is hot, and the hob will be ready to be used for coo- king. When the control panel is disconnec- ted using the on/off sensor button (1), the safety function will reactive and will appear again the next time the touch con- trol panel is activated.

Cancelling the safety function

The safety function can be deactivated permanently by following these steps:

1 Touch the Power sensor button (6) and the sensor button of the front right heating element (3) at the same time.

2 Immediately afterward, touch the Power

sensor button (6).

For the operation to be carried out, no other sensor button should be touched in the following 10 seconds. If the operation is not carried out correctly, the touch con- trol panel will remain locked and will turn off after 20 seconds.

When the on/off sensor (1), is used to reactivate the control panel after cance- lling the safety function, the hob will be ready to be used for cooking.

Stop Function

(models IRX... and IQX...)

By using this function, it is possible to make a pause during the cooking process. If the timer function is also activated, it will also be paused.

Activating the Stop function

1 The cookware is located on the cooking zones, which are working at a certain level.

2 Touch the Stop sensor button (7) for one second. The function will be pau- sed.

The symbol will appear in the indicators of the heating elements, and the error messages, residual heat, fast heat-up or lack of cookware indicators, will also disappear until the function has been deactivated.

Deactivating the Stop function

1 Touch the Stop sensor button (7) and then touch any other sensor button within 10 seconds.

The heating element will go back to how it was before the Stop function was activated.

The second sensor button must be tou- ched within 10 seconds; otherwise, the hob will disconnect. If cooking has not been restarted 10 minutes after the pause, the appliance will turn off.

Double or Triple Circuit hotplates (models TRX...)

Double and triple circuit heating elements make it possible to use the inner ring or, also, the outer ring(s), depending on the

22

Page 22
Image 22
Teka IRX 635, TRX 645, IQX 635, TRX 635 Stop Function Models IRX... and IQX, Double or Triple Circuit hotplates models TRX