Teka IQX 635 Keep warm function Models IRX… and IQX, Power Function Only models IRX… and IQX

account the time passed up until that point.

Example:

You are cooking on a heating element and you have chosen power level 1 (48 seconds of fast heat-up) and after 30 seconds you change to power level 4 (312 seconds). The remaining automatic boost time will be 282 seconds (312 seconds minus 30 seconds).

The fast heat-up function will stop if the cookware is taken off the heating ele- ment. If the cookware is once again pla- ced on the heating element (10 minu- tes), the fast heat-up function will res- tart where it left off.

It is not possible to activate the fast heat- up function on the heating elements if the Power function is activated.

DISCONNECTING THE FAST HEAT-UP FUNCTION

Once 10 seconds have passed after the fast heat-up function has been activated:

1 Choose the heating element. The corresponding decimal point must be on (16).

2 Touch the slider cursor (2) to a lower level.

The fast heat-up function will be automati- cally deactivated and the heating element will stay on at a constant power level.

Keep warm function

(models IRX… and IQX...)

By using this function, it is possible to keep the food warm that is inside cookware pla- ced on a cooking zone.

GB

1 There is cookware on one of the heating elements at a previously chosen power level.

2 Touch the sensor (15) and the symbol will appear in the indicator.

To disconnect this function, just change the power levels after selecting the heating element. This function has a maximum operation time after which the hob will turn disconnect.

Power Function

(only models IRX… and IQX...)

It is possible to concentrate additional power in the induction cooking zones (see values indicated with an * in the Introduc- tion section) by using the Power function.

1 Choose the desired cooking zone by using the corresponding sensor button

(3).

2Touch the Power sensor button (6). The power level indicator will show the symbol P.

The Power function has a maximum dura- tion of 10 minutes. After this time, the power level will automatically adjust to power level 9.

Each side of the cooker has an induction generator that works with a maximum power of 3,600 watts. Therefore, the Power function cannot be used at the same time on two induction elements that are on the same side. In other words, if the Power function is activated on an induction element on the left side, the Power func- tion can only be activated on another induction element that is on the right side.

Once the Power function has been activa- ted on one induction element, the other

25