GB
induction element on the same side may use the remaining power, up to a total of 3,600 watts. If its power level is too high, the touch control panel will automatically decrease it.
Afterward, the induction element will conti- nue operating at power level 9. The func- tion may also disconnect automatically if the cooking zone temperature is very high.
If the cookware is taken off of the cooking zone while the Power concentration func- tion is activated, the function will remain active and the time will continue to pass.
The Power function can also be activated without placing cookware on the cooking zone, but the cooking element will not supply energy until cookware has been placed on the cooking zone.
Safety disconnection
MAXIMUM OPERATION TIME
If one or various heating elements are accidentally left on, they will be disconnec- ted automatically after a certain amount of time has passed after the last action using the element. (See table 2)
Table 2
Power level | MAXIMUM |
selected | OPERATION TIME |
| (in hours) |
0 | 0 |
1 | 6 |
2 | 6 |
3 | 5 |
4 | 5 |
5 | 4 |
6 | 1,5 |
7 | 1,5 |
8 | 1,5 |
9 | 1,5 |
P | 10 minutes, readjusts to 9 |
When the "safety disconnection" has occu- rred, the residual heat indicator H of the corresponding heating element will appear in the power indicator if there is a risk of burn. Otherwise, a 0 will be shown.
SAFETY IN CASE OF COVERED SEN- SOR BUTTONS
The touch control panel has a function that makes it so the appliance automatically detects when there is an object (cookware, rag or spilled liquids) covering the panel sensor buttons. This makes it possible to prevent the object from activating or deac- tivating a heating element without you rea- lising it.
When the touch control panel disconnects the appliance for safety reasons, it begins to beep and it shows an error message until the object covering the control panel is removed.
If the touch control panel is in
Timer function
This feature enables you to do your coo- king while you yourself are not present: the timed heating element will turn off automa- tically when the time you have chosen elapses.
Around the indicator of the chosen time there are four or three indicator lights (13) that indicate which of the heating elements is timed. For example, if you time the upper left heating element, the light over the indicator will turn on, on the left.
If the timer is not being used with any of
