Automation– and Drive Technology- SCE
11.Values should be modified in a data block. It is not adequate to modify them in the field Initial value . This is only possible, when one switches to the Data View under View ( View Data View).
12.Now a new value can be entered in the field Actual value and saved onto the hard drive with
as well as downloaded into the CPU with 
( Actual value 
).
|
|
|
|
|
Forward | Notes | Generating data blocks |
|
|
|
|
|
|
|
T I A Training document | Page 15 of 18 |
| Module B4 | |
Last revision: 02/2002 |
|
| Data blocks | |
