Siemens C450 IP Web configurator, Changing the base station system PIN, Setting the default connection, Setting the wake up time, When the alarm clock rings…

Setting the wake up time.

§Menu§ ¢Alarm Clock ¢Wake up time

¤Enter the wake up time in hours and minutes, then press §OK§.

When the alarm clock rings…

Alarm repeat after 5 minutes

§Snooze§ Press the display key or any key.

If you press §Snooze§ three times the alarm clock switches off for 24 hours.

Switching off the alarm clock for 24 hours

§Off§

Press the display key.

Changing the base station system PIN

You can change the base station's 4-digit default system PIN ("0000") to a 4-digit

PIN known only to yourself.

¢ ¢

¢System PIN

~Enter current system PIN and press §OK§.

~Enter your new system PIN and press §OK§.§Menu§ Settings Base

For security reasons, "****" is displayed instead of the system PIN.

aPress and hold (idle status).

Web configurator

Setting the default connection

You can make settings according to

whether you want to make calls via VoIP or
fixed network by default.
§Menu§	¢	Settings	¢
			Base
	¢Default Line Type
IP / fixed line
		Select and press §OK§ (‰= on).

For additional information on the phone and VoIP settings, please see the full user guide for your Gigaset C450 IP (page 5) on the Internet.

Web configurator

The Web configurator is the Web interface for your handset. It allows you to make the settings for your phone's base station via your PC's Web browser.

Requirements:

uA standard Web browser is installed on the PC, e.g. Internet Explorer version 6.0 or higher, or Firefox version 1.0.4 or higher.

uThe phone and PC are connected to each other via a router or a switch.