Siemens C450 IP SMS (text messages), Writing/sending/saving SMS, Receiving/reading SMS, Managing SMS lists, Note:, .Note:, Requirements:, Reading a text message

SMS (text messages)

Your unit is supplied ready for you to send SMS messages immediately.

When an SMS is sent, the base station automatically establishes a connection via the fixed network.

Requirements:

uCalling Line Identification (CLIP) has been enabled for your telephone con- nection.

uYour network provider supports SMS in the fixed network (information on this can be obtained from your network provider).

uYou are registered with your service provider to send and receive SMS.

Note:

When you call up the SMS menu for the first time, you are automatically registered with accessible SMS centres whose number you have entered. You can then receive SMS from these SMS centres.

You can enter further SMS centres and register with them with the help of the registration wizard. To find out how to do this, please read the full user guide for your Gigaset C450 IP (page 5).

Writing/sending/saving SMS

An SMS may contain up to 160 characters. §Menu§ ¢SMS ¢Write Message

~Write an SMS.

§Menu§ Send Text

Select and press §OK§.

s/ ~ Enter the number with dialling code (including your local area code) from the directory or key it in manually, and press §OK§.

For SMS to an SMS mailbox: put the mailbox ID at the end of the number.

The SMS is sent.

Or:

SMS (text messages)

§Menu§ ¢ Save Text

Select and press §OK§.

The SMS is saved in the draft message list. You can later edit and send it.

Opening the draft message list: §Menu§ ¢SMS ¢Outgoing.

.Note:

If you are interrupted by an external call whilst writing the SMS, it is automatically saved in the draft message list.

Receiving/reading SMS

All received SMS messages are saved in the message list. Linked SMS messages are displayed as one message. 160 characters displayed.

New SMS messages are signalled on all Gigaset C45 handsets by a message in the display, the flashing message key fand an advisory tone.

Reading a text message

¤Open the incoming message list with the message key f(page 15) or via Menu§ ¢SMS ¢Incoming 01+05.

¤Select SMS

¤Select Menu§ ¢Read SMS and press OK§.

Managing SMS lists

You can use the incoming message and draft message lists to, e.g.:

uDelete individual SMS or the entire list u Forward or reply to an SMS

¤Select SMS and press §Menu§ to open the menu.

For additional information, please see the full user guide for your Gigaset C450 IP (page 5).

17