First Steps

Pack contents

The pack contains:

uone Gigaset C450 IP base station u one Gigaset C45 handset

u one mains adapter for the base station u one charging cradle incl. mains adapter u one phone cord

u one Ethernet cable (LAN cable) u two batteries

u one battery cover u one belt clip

u one quick guide

Documentation

A more detailed description of your Gigaset C450 IP and your Web configurator is available on the Internet at:

www.siemens.com/gigaset

This full description is in PDF format. You will need Adobe® Reader® to view these documents. Adobe® Reader® is available on the Internet at www.adobe.com.

Setting up the handset for use

The display is protected by a plastic film.

Please remove the protective film!

Inserting the batteries

Caution:

Use only the rechargeable batteries recommended by Siemens on page 23! This means that you must never use conventional (non- rechargeable) or other battery types as this could result in significant health risks and damage to property. For example, the outer casing of the batteries could be destroyed or the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.

First Steps

¤Insert the batteries the right way round (see figure).

The polarity is indicated in the battery compartment.

The handset switches on automatically. You will hear a confirmation tone.

Closing the battery cover

¤Place the cover on the battery compart- ment as shown in the diagram, then push it up until it clicks into position.

Opening the battery cover

¤Press down on the battery cover below its upper end and slide the cover down.

Connecting the charging cradle

Connecting the charging cradle and mounting it on the wall (if required) is described at the end of this user guide.

¤To charge the batteries, leave the hand- set in the charging cradle.

Notes:

–Only place the handset in the charging cra- dle that is intended for it.

–If the handset has switched itself off because the batteries are flat and if it is then placed in the charging cradle, it will switch itself on automatically.

5