![](/images/new-backgrounds/1040394/4039457x1.webp)
Type | Troubleshooting | |
| WARNING: Allow only qualified personnel to perform the | |
5. Troubleshooting | ||
| following tasks. Observe and follow the safety instructions in | |
|
this document and all other related documentation.
WARNING:
This section contains troubleshooting information. This information covers only the most common problems that you may encounter. If you cannot solve the problem with the information given here, contact your local Siemens Airfield Solutions representative for help.
| Problem | Possible Cause | Corrective Action |
1. | Lamp will not | Defective lamp | Replace lamp and film disc cutout (if used). |
| energize |
| Refer to Replacing Lamp in the Maintenance |
|
|
| section. |
|
| Loose or broken contacts | Tighten or replace. |
|
| Moisture inside assembly causing | Open up light assembly. Clean, dry, and |
|
| current leakage | inspect light assembly. Replace |
|
| Defective isolation transformer | Check transformer output current with |
|
|
| meter. |
|
|
|
|
2. | Lamp not turning on | Continuity incorrect | Check lamp filament and wiring for |
| at normal level |
| continuity. |
3. | Lamp output | Broken or damaged prism | Replace outer cover assembly. |
| distorted |
|
|
4. | Improper color | Filter broken | Replace filter bracket assembly. |
|
| Filter bracket broken | Replace filter bracket assembly. |
|
|
| Continued on next page |
© 2001 Siemens Airfield Solutions, Incorporated | 96A0149E | Page 23 |
All rights reserved | Issued 5/01 |
|