Siemens P01-07 Exercises, Tasks, Name, Type, Industry Automation and Drive Technologies - SCE

Industry Automation and Drive Technologies - SCE

EXERCISES

We are going to apply to the exercises what we learned in the theory part and the step by step instructions. We are going to utilize and expand on the existing multi-project provided in the step by step instructions (PCS7_SCE_0107_R1009.zip).

This exercise is intended as a complex exercise, where the technical knowledge presented in the entire Module P01 is repeated. The tasks below are to be an aid to incorporate with Reactor R002 the second line that was missing so far into the project.

TASKS

The following steps are based on the step by step instructions. For each task, the corresponding steps in the instructions can be used as an aid.

1.For the second line, the corresponding plant hierarchy has to be implemented. Set up a folder for each of the individual drive functions listed in Table 1.

2.Implement the individual drive functions in the associated folder of the plant hierarchy. Use the functions that are already implemented from the previous exercises. When you implement the individual drive functions, don’t omit to carry out the required steps for plant safety.

3.Based on the step by step instructions, implement in the SFC step sequence a second line that includes the required steps for Reactor R002. The objective is implementing the recipe according to the process description. In the step by step instructions, all steps in reference to Reactor R001 are already implemented.

	Table 1: Required individual drive functions
Name		Type
A1T1S001		Motor
A1T1S002		Motor
A1T1X004		Valve
A1T1X005		Valve
A1T2H004		Manual operation
A1T2H005		Manual operation
A1T2H009		Manual operation
A1T2H016		Manual operation
A1T2L002		Measure level
A1T2S002		Motor
A1T2S004		Motor
A1T2X004		Valve
A1T2X005		Valve
A1T2X008		Valve

TIA Training Manual	Page 41 of 41	Module P01_07
Status: 12/2010		PCS 7 for Universities