Step 2:

4

Connect the ADSL Router-modem via Ethernet interface

1.With your computer off, plug the end of the ADSL cord (silver) into the DSL port of your ADSL Router-modem.

2a. Connect the Ethernet cable (light gray) to a LAN port of your ADSL Router-modem. 2b. Connect the other end of the Ethernet cable to the LAN port of your computer.

3.Connect the power supply to your ADSL Router-modem and connect the power cord to the power supply.

4.Plug the power plug into a power outlet.

5.Turn your ADSL Router-modem on by pushing on the power button.

6.Turn your computer on and wait until your Operating System (OS) is started up.

7.Proceed with step 3 on the next page (Read first the introduction and continue then with the paragraph related to your operating system (OS)).

SANTIS® ADSL 50

ADSL - Router-modem

1.

 

5.

2a.

3.

 

 

PC or Notebook

Ethernet cable (light gray)

2b.

Step 4:

 

9

Configure the ADSL Router-modem (Internet Access)

(1. Start your web browser (e.g. Internet Explorer) and type 192.168.1.1 in the address field of your browser. Press “Enter”.

1

2.After connecting to the device, the “Quick Configuration” page will be displayed:

3

2

Note: If the “Quick Configuration” page is not displayed, please check the TCP/IP settings of your computer (“Obtain IP address automatically” must be enabled). Please refer to step 3 in this Quick Start Guide.

3.Enter User Name and Password of your Internet Service Provider (Boxed 3” at “ADSL Configuration”)

4.Click to Connect and Save.

5.Username and Password will automatically be saved and the status of the Internet connection will be indicated.

ADSL cord (silver)