Step 3:

6

Step 3:

7

Configure the PC (TCP/IP settings) under

 

Configure the PC (TCP/IP settings) under

 

Windows 98 and Windows Millennium

 

Windows 2000

 

Note: Windows 98 SE users need the Windows 98 SE installation CD-ROM to complete the instal- lation.

1.Click on Start -->Settings -->Control Panel. Double-click on the Network icon to open the Network screen.

2.Select the Configuration tab and highlight the TCP/IP line for the applicable Ethernet adap- ter*. If the word TCP/IP appears by itself, select that line**. Click on Properties.

3.Click the IP address tab and select Obtain an IP address automatically.

4.Click on the Gateway tab and verify that the Installed Gateway field is blank. Click on OK.

5.Click again on OK. Windows may ask you for the original Windows installation disk or additional files. Supply them by pointing to the correct location, e.g. D:\win98, where “D” represents the letter of your CD-ROM drive.

6.If Windows asks you to restart your PC, click on Yes. If Windows does not ask you to restart, restart your computer anyway.

*Note: Choose a TCP/IP entry whose name contains Ethernet adapter or refers to your wireless client adapter if you are going to configure the SANTIS ADSL 50 Router-modem via the wireless LAN interface. Do not choose a TCP/IP entry whose name is PPPoE, VPN or other.

**Note: If there is no TCP/IP line listed, refer to the User Manual on your Siemens CD-ROM to install TCP/IP now.

2

3

1.Click on Start -->Settings -->Control Panel. Double-click on the Network and Dial-up Connections icon. The Network screen will appear.

2.Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first Local Area Connection listed). Double-click on Local Area Connection and click on Properties.

3.Select Internet Protocol (TCP/IP) and click on Properties.

4.Select Obtain an IP address automatically and click on OK on the subsequent screens to com- plete the PC’s configuration.

5.Restart your computer.

2

3

4