Siemens TC65 manual State 5 Java Application Active, General Purpose I/O and I2C

TC65 JAVA User's Guide

Strictly confidential / Released

s

4.4.1.5State 5: Java Application Active, General Purpose I/O and I2C

The Java application is active, ASC1 is used as System.out and the Java instance of the RS- 232 serial interface is connected to ASC0. The Java application is activated with at^sjra. The I/O pins are configured with at^scpin or at^sspi. Refer to the AT Command Set [3] for AT command details.

Javaaccess toserial

interface(CommConnection)

ASC 0

System.out

ASC 1

AT parser 0 withCSD

JavaAT commandAPI

withCSD

AT parser without CSD

JavaAT commandAPI without CSD

AT parser without CSD

JavaAT commandAPI

without CSD

upto10GPIO pins:

I2C:

Figure 8: Module State 5

4.4.1.6State 6: Java Application Active, General Purpose I/O and SPI

The Java application is running, ASC0 is used as System.out and the Java instance of the RS-232 serial interface is connected to ASC1. The Java application is activated with at^sjra (refer to the AT Command Set [3]).

Java access to serial

interface (CommConnection)

ASC 0

System.out

ASC 1

AT parser 0	AT parser
with CSD	without CSD
Java AT command API	Java AT command API
with CSD	without CSD

Figure 9: Module State 6

AT parser without CSD

Java AT command API

without CSD

up to 10 GPIO pins

SPI

TC65 JAVA User's Guide_V05 Page 22 of 90 26.09.2005