Siemens TC65 Configuration of Serial Interface, Java Commands, Restrictions Flash File System

TC65 JAVA User's Guide	s
Strictly confidential / Released

5.7.4Configuration of Serial Interface

While a Java application is running on the module, only the AT Command API is able to handle AT commands. All AT commands referring to a serial interface are ignored. In particular these commands:

•AT+IPR

•AT\Q3

If Java is running, the firmware will ignore any settings from these commands. Responses to the read, write or test commands will be invalid or deliver “ERROR”.

Note: When a Java application is running, all settings of the serial interface are done with the class CommConnection. This is fully independent of any AT commands relating to a serial interface.

5.7.5Java Commands

There is a small set of special Java AT commands:

•at^sjra, start a Java application

•at^sjnet, configuration of Java networking connections

•at^sjotap, start and configuration of over the air provisioning

•at^sjsec, security configuration

Refer to the AT command set [3].

5.8Restrictions

5.8.1Flash File System

The maximum length of a complete path name, including the path and the filename, is limited by the Flash file system on the module to 124 characters. It is recommended names of classes and files be distinguished by more than case sensitivity.

5.8.2Memory

The CLDC 1.1 HI features a just-in-time compiler. This means that parts of the Java byte code which are frequently executed are translated into machine code to improve efficiency. This feature uses up RAM space. There is always a trade off between code translation to speed up execution and RAM space available for the application.

TC65 JAVA User's Guide_V05 Page 28 of 90 26.09.2005