Siemens TFT, CRT manual Type Order No Simneo Preconf, Simatrix NEO, Osd

Matrix Switching Systems

Matrix Switchers

Type			Order No.
SIMNEO Preconf..	SIMATRIX NEO Preconfigured		SIMATRIX NEO..
	Preconfigured constellations of SIMATRIX NEO. SIMATRIX NEO is a vid-
	eo matrix that can be expanded up to a maximum of 224 inputs and 32
	outputs using both main and extension chassis. The SIMATRIX NEO is a
	space-saving 19-inch complete system in a desktop housing‚ commenc-
	ing with a basic configuration of 16 inputs‚ 8 outputs and 32 alarms and
	includes an LCD display for diagnostic information. The SIMATRIX NEO
	is a freely-parameterisable and universally applicable video matrix
	switching system‚ including straight forward setup software for up and
	downloading of settings. The application range extends from the pure
	matrix function up to event-controlled control alarm receiving centres‚
	in conjunction with external alarm contacts or messages for processing
	danger‚ alarm and intruder signals. IVM is an optional‚ user-friendly
	graphical interface for the SIMATRIX NEO. Operation is possible via the
	CKA4820 remote keyboard.
	Baud rate	1200-19.200 bit/s
	Alarm output relay	1
	Control outputs	8 control outputs (open-collector);
		max. 30 V‚ max. 50 mA‚ Relay with 2
		floating changeover contacts for
		common alarm output
	Character height	18 screen lines
	Character representation	White black border
	Camera sequences	1 sequence per monitor output‚ 32
		defineable cycles
	Telemetry	RS422‚ RS485‚ TTY
	Telemetry control	16 x TTY outputs (20 mA current
		loop)
	Telemetry control RS485	4 RS485 ports protocols: CCDA‚ SCU‚
		SIVIS‚ PELCO-D‚ 16xRJ11
	Television standard	PAL/CCIR
	Distance SCU to SIMATRIX	Up to 2 km with 0‚8 mm diameter
	Parameterisation PC	1 x V.24 (RS232C)
	Keyboard interface	8 x TTY interface (20 mA) with pow-
		er supply for external keyboard
		(200 mA)‚ RJ12
	Video loss detection	Full automatic
	Field size	12 text lines with 24 character each
	Matrix point switching time	80 ms (typical.)‚ 200 ms (max.) (fol-
		lowing command input on video
		matrix)
	OSD	Full IBM character set
		Internal synchronization
	Power requirements	115 D230 V AC‚ Tolerance: +10 % to
		-15 %‚ 50-60 Hz switchable
	Power consumption	Max. 55 W‚ depending on size

10-6 © Siemens Building Technologies Group