Product Information | November, 2001 |
AS 488/TM | M02.02 |
2.3 Procedure for Update M01.07 (resp. M01.06/05/04) to M01.08
2.3.1 Update by Commissioning Terminal
You will find the files needed for an update on the UPGRADE/UPDATE diskette too. Please copy all files from the directory C:\UPGRADE\AS_SW.202 (without
On the Commissioning Terminal PC connected to the AS 488/TM, start the program ASBEDIEN.exe (via ASBEDIEN.PIF under Windows 3.11, so that the program runs in full screen mode and without a screen saver).
Now, in command mode, copy the files previously backed up to the PC to the memory card in the AS in the following sequence:
<ESC>COPY_TM IBS_BEDI.386 | resp. <ESC>COPY_TM C:\ASBEDIEN\IBS_BEDI.386 |
<ESC>COPY_TM STARTER.386 | resp. <ESC>COPY_TM C:\TEMP\STARTER.386 |
<ESC>COPY_TM BEDIEN.386 | ... |
<ESC>COPY_TM BUSTASK.386 |
|
<ESC>COPY_TM EATASK.386 |
|
<ESC>COPY_TM LA_AR.386 |
|
<ESC>COPY_TM EMULATOR.EXE |
|
<ESC>COPY_TM FUNC.EXE |
|
<ESC>COPY_TM C_EAM.EXE |
|
<ESC>COPY_TM AR_DG.EXE |
|
<ESC>COPY_TM RMOS.INI |
|
<ESC>COPY_TM M7_235AR.SYS |
|
<ESC>COPY_TM VERSION.TXT |
|
<ESC>COPY_TM DP_TREIB.NL |
|
<ESC>COPY_TM IP262.NL |
|
<ESC>COPY_TM FENS.NL |
|
<ESC>COPY_TM NAS_DIAG.NL |
|
If necessary, the following files (in directory A:\INI) should be modified in accordance with the new configuration guidelines.
AS_KOM.INI | settings for |
DP1.INI | parameters for pull&plug, diagnosis and ODIS |
DP2.INI | parameters for 2nd DP line |
L2AMPRO.INI | parameters for system bus |
After a successful transfer, exit ASBEDIEN (with
Now perform the following two steps:
3)Initiate a reboot of the AS 488/TM (reset or off/on)
4)Install the new terminal program ASBEDIEN V1.08 or V2.00 to your PC from the diskette (IBS tools) included with your delivery.
Copyright © SIEMENS AG | Page 9 of 18 |
