Interfaces and connectors | Features |
LAN connectors
On this system board you will find two LAN controllers: a Gigabit LAN controller (Broadcom BCM5755T) and a service LAN controller.
The Gigabit LAN controller BCM5755T supports the transfer rates of
10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The Service LAN controller supports the transfer rates of 10 Mbit/s and 100 Mbit/s.
The LAN controllers support WOL function through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here Intel PXE is supported.
The service LAN port serves as management interface and is prepared for RemoteView.
The LAN connectors are equipped each with two LEDs (light emitting diode) indicating the transfer rate and the activity.
2 |
|
|
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
|
|
|
Figure 7: LAN connector system LAN controller
1 | LAN transfer rate | green + | off | transfer rate 10 Mbit/s | |
|
| yellow |
|
| |
|
|
|
|
|
|
|
| green | on | transfer rate 100 Mbit/s | |
|
|
|
|
|
|
|
| yellow | on | transfer rate 1000 Mbit/s | |
|
|
|
|
|
|
2 | LAN link/activity | green | on | LAN connection | |
|
|
|
|
|
|
|
|
|
| off | no LAN connection |
|
|
|
|
|
|
|
|
|
| flashing | LAN transfer |
|
|
|
|
|
|
26 | Technical Manual | D2559 (TX150 S6) |
