Siemens XT55 AVL

XT55 AVL User’s Guide

Confidential/Released s

mo b i l e

XT55_avl_ug_V03 Page 2 of 37 28.06.2004

Document Name: XT55 AVL User’s Guide

Version: 03

Date: June 28, 2004

DocId: XT55_avl_ug_V03

Status: Confidential/Released

General note

Product is deemed accepted by Recipient and is provided without interface to Recipient´s products.

The Product constitutes pre-release version and code and may be changed substantially before

commercial release. The Product is provided on an “as is” basis only and may contain deficiencies or

inadequacies. The Product is provided without warranty of any kind, express or implied. To the

maximum extent permitted by applicable law, Siemens further disclaims all warranties, including

without limitation any implied warranties of merchantability, fitness for a particular purpose and

noninfringement of third-party rights. The entire risk arising out of the use or performance of the

Product and documentation remains with Recipient. This Product is not intended for use in life support

appliances, devices or systems where a malfunction of the product can reasonably be expected to

result in personal injury. Applications incorporating the described product must be designed to be in

accordance with the technical specifications provided in these guidelines. Failure to comply with any

of the required procedures can result in malfunctions or serious discrepancies in results. Furthermore,

all safety instructions regarding the use of mobile technical systems, including GSM products, which

also apply to cellular phones must be followed. Siemens AG customers using or selling this product

for use in any applications do so at their own risk and agree to fully indemnify Siemens for any

damages resulting from illegal use or resale. To the maximum extent permitted by applicable law, in

no event shall Siemens or its suppliers be liable for any consequential, incidental, direct, indirect,

punitive or other damages whatsoever (including, without limitation, damages for loss of business

profits, business interruption, loss of business information or data, or other pecuniary loss) arising out

the use of or inability to use the Product, even if Siemens has been advised of the possibility of such

damages. Subject to change without notice at any time.

Third party products

Siemens disclaims all warranties concerning the software or their freedom from the rights of third

parties. CUSTOMER shall indemnify and hold harmless Siemens from and against any claims or

demands for damages asserted on account of the use of the applications developed by CUSTOMER

or third parties using the software, unless CUSTOMER is able to prove that such third party damages

or claims are not based on the software or the developed applications

Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its

contents and communication thereof to others without express authorization are prohibited. Offenders

will be held liable for payment of damages. All rights created by patent grant or registration of a utility

model or design patent are reserved.

Trademark notices

MS Windows® is a registered trademark of Microsoft Corporation.

SiRFDemo, SiRFflash and SiRFstar software are registered trademarks of SiRF Technology Inc.

Section 3.2.1 and 4.1 used with the permission of SiRF Technology, Inc., San Jose, California