Model 5398-21 Gas Sample Draw Panels
Gas Sample Draw Panel |
|
| ||
use method of drawing an air sample from a remote, or |
|
| ||
hostile area to a more convenient location for analysis. |
|
| ||
The Sample Draw Panel can use gas sensor modules |
|
| ||
for Combustible or Toxic gases, either the Sentry style |
|
| ||
modules or the Analog |
|
| ||
can use gas sensor modules for Combustible or Toxic |
|
| ||
gases. |
|
|
|
|
The integral sample pump to draw the sample at a high |
|
| ||
flow rate to reduce sample time. The sample is delivered |
|
| ||
to the sensor |
|
| ||
pressure conditions. A bypass line exhausts excess |
|
| ||
sample volume to avoid high flow rates across the sensor. |
|
| ||
Each panel is a |
|
| ||
flow indication, valves to control sample draw and |
| Model | ||
calibration gas delivery, and the gas detection sensor |
| |||
|
| |||
and transmitter (priced separately) all housed in an | The Sample Draw Panels are intended for installation in | |||
enclosure. The flow systems design will deliver the | an area, which is accessible, by the user for periodic | |||
sample to the sensor with minimal pressure affecting | routine inspection and calibration. The panel requires | |||
the sensor as the excess flow and pressure are bled off | 120 VAC input and provides local visual as well as | |||
via the bypass flowmeter. |
| remote indication of pump and flow status. | ||
Specifications: |
|
|
|
|
Power: |
| 110 VAC @ 1 amp |
| |
Pump: |
| Oil Free, Diaphragm Type | ||
Maximum Sample Draw: | 600 feet with 1/4” tubing |
| ||
Flow Rates: |
| |||
Maximum Operating Pressure: | 50 PSIG |
| ||
Controls: |
| |||
Outputs: |
| Dry contact pump flow failure switch (contacts closed when | ||
|
| flow is detected, open for alarm) | ||
Filter: |
| Coalescing filter for moisture | ||
Tubing Connections: |
| 1/4" Tube Fittings for connection of: | ||
|
| - sample lines | - sample exhausts | |
|
| - calibration gas | - bypass exhaust | |
Enclosure type: |
| NEMA 4X Fiberglass with window | ||
Dimensions (H x W x D): | 16.9 x 15.0 x 8.3 inches (42.9 x 38.1 x 21.1 cm) | |||
Weight: |
| 17.6 lbs (8.0 Kg) - without gas sensor module | ||
Sensor/Transmitter: |
| Mounting provisions for all standard Sierra Monitor Corp. | ||
Ordering Information: |
| Sentry and Analog gas sensor modules | ||
|
|
|
| |
Model | Single Channel Gas Sample Panel |
|
Model | |
Sierra Monitor Corporation 1991 Tarob Court Milpitas, CA 95035 USA (408) | |
Visit our Web site: www.sierramonitor.com |
|