Raven iDEN
b.To see what you are typing as you type it, you will need to turn on the echo and verbose mode. Type ATE1V1 and press Enter.
c.If you get a reply of “OK”, then you entered the command successfully. If you get a reply of “0” or “ERROR”, try entering the command again.
5.Enter the Master Reset Command for iDEN
a.Type AT*PROVISION=000000, 0123456789
b.The Raven should respond with: “Master Reset Succeeded”. With any other response, contact TELUS to check the account status.
c.Press the reset button on the Raven.
The Raven should now register on the network.
Hardware Installation
Your Raven should be mounted in a position that allows easy access for the cables so they are not bent, constricted, in close proximity to high amperage, or exposed to extreme tempera‐ tures. The LEDs on the front panel should be visible for ease of operational verification. You should ensure that there is adequate airflow around the modem but that it is kept free from direct exposure to the elements, such as sun, rain, dust, etc.
In a mobile location, such as a car or truck, ensure the location is secure both against abrupt movements of the vehicle and from other items coming into contact with the modem.
Caution: The Raven is in a hardened case and designed for use in industrial and extreme environments. However, unless you are using cables expressly designed for such environments, they can fail if exposed to the same conditions the Raven can withstand.
|
|
|
|
|
|
|
9 |
|
|
|
|
| 20070914 |
|
|
|
