User Guide
18 2130374

Exiting Watcher

In order to close and exit Watcher, you must ensure that you
are disconnected from the network. (See “Connect /
Disconnect” in this chapter on page 18).
1. Click the Watcher system tray icon found in the system
tray and a menu appears:
Figure 4-1: System tray shortcut menu
2. Select Exit from the menu. (This closes and exits Watcher
and the icon disappears from the system tray).

Powering the AirCard 580 (On/Off)

To power the AirCard580 on and off:
1. Click the Watcher icon found in your system tray.
2. Select “Power Off Card” or “Power On Card” from the shortcut
menu.
Note: Powering Off the
AirCard 580 does not mean that
you have exited Watcher.
WARNING: Do not eject theAirCard580 from your notebook PC until
you have followed the Unplug/Eject Hardware instructions for proper
removal [See Chapter 3, page 12]. Removing the card improperly may
damage your computer.
Note: If you have not activated
your AirCard 580, an Activation
Alert Notification displays once
an attempt to connect is made.
The dialog explains that you
must activate your card in order
to establish a connection.
Connect and disconnect

Connect

Once you have properly inserted the AirCard580 wireless
modem into your notebook PC’s Type II PC Card slot. Watcher
notifies that it is “Ready” to connect to the network.