Sigma
Power Pack and Battery Charger
STANDARD ACCESSORIES
1 | 2 | 3 |
|
| USB Cable connects |
| USB Cable connects |
CHARGER UNIT |
| the charger to a |
| the charger to a |
|
| digital device |
| computer USB port |
|
|
|
|
|
4
Adaptor plug set for mobile telephones
OTHER ACCESSORIES
5 | 6 | 7 | 8 |
4 x AAA
DC adaptor AC adaptor Plug for PSP rechargeable batteries
fig 1
| (3) LED torch ON/OFF switch |
(1) DC Input |
|
| (4) LED indicator |
2) ON/OFF | (5) DC output |
switch |
|
|
|
|
|
|
| (6) Cover & battery | ||
|
|
|
|
|
|
| compartment | ||
|
|
|
|
|
|
|
|
| |
| Specification |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Charger |
| Input |
| 5v 0.5a (from usb port) | ||||
| accessory no.1 | USB output |
| 5.5v 0.8 (from usb port of the charger) | |||||
|
|
|
| Charge current |
| aaa x 4 : (5.6V 0.3A 1.68VA) | |||
| AC Adaptor |
| Input |
| |||||
| accessory no.6 | Output |
| 5V DC 1A |
| ||||
| DC Adaptor |
| Input |
|
| ||||
| accessory no.5 | Outut |
| 5V DC 1A |
| ||||
|
|
|
|
|
|
|
|
| |
| Size |
| Charging Current |
|
|
| Charging Time | ||
|
|
| 300mA |
| 600mAh |
| 120minutes | ||
| AAA |
|
| 800mAh |
| 160minutes | |||
|
|
|
|
|
| 1000mAh |
| 200minutes | |
|
|
|
|
|
|
|
|
|
|
Owners Manual
Thank you for purchasing the Camlink Sigma Power Pack and Battery Charger. Please read this manual carefully. It contains important operating instructions.
This unit is specially designed for charging batteries or power up your USB devices with a safe,
Charging Instructions
(For charging AAA Ni-MH batteries)
1.Insert 4 pieces of AAA rechargeable Ni- MH batteries into the battery compartment, ensuring correct polarity ( + and - ) in accordance with the signs in the battery compartment.
2.Slide the ON/OFF switch [see Fig. 1 (2)] to the ON position to operate the charger and start the charging process.
3.When using with a operating computer (with Charger unit & USB cable - Accessory no.3)Connect the supplied USB cable plug into the DC input socket of the charger [see Fig. 1 (1)]. Plug the
4.When using indoors (with AC adaptor - Accessory no. 6) Connect the supplied AC adaptor plug into the DC input socket of the charger [see Fig. 1 (1)]. Plug the AC adaptor into household electric outlet (100- 240V AC). The switching power supply will adjust automatically and the LED indicator will light instantly. Caution: The supplied AC adaptor supplies 5VDC and delivers 1A, and its plug fits into the DC input socket of the charger. Using an adaptor that does not meet these specifications could damage the charger.
5.When using in a vehicle (with DC adaptor
- Accessory no.5)
Connect the supplied DC adaptor plug into the DC input socket of the charger [see Fig. 1 (1)]. Plug the large end of the cord into the 12V car lighter power socket and the LED indicator will light instantly.
6.The GREEN LED [see Fig. 1 (4)] will flash to indicate correct charging. After the batteries are fully charged, the GREEN LED will light continuously indicating the trickle charge is on. The charged batteries are now ready for use. 7.Unplug the charger and remove the batteries from the charger
when not in use.
8.Begin again at Step 1 to charge the next set of batteries.
Charging your USB devices
(with AAA rechargeable Ni-MH batteries)
1.Before using, check the USB device’s input voltage and the charger’s output voltage to see if they match. Make sure the total loading does not exceed the rated output current of the charger.
2.Slide the ON/OFF switch [see Fig. 1 (2)] to the OFF position before connecting the charger to your Digital device.
3.Insert 4 pieces of AAA rechargeable Ni- MH into the battery compartment.
4.Choose the suitable connector (from Accessory no.4 to no.7) and connecting USB cable (Accessory no.2). Connect the USB cable with your digital device and the DC output [see Fig. 1 (5)] of the charger.
5.Slide the ON/OFF switch [see Fig. 1 (2)] to the ON position to operate the charger and start the charging process.
6.Slide the ON/OFF switch [see Fig. 1 (2)] to the OFF position when the charger is not in use.
Using as a Torch
1.Insert 4 pieces of AAA rechargeable Ni- MH batteries into the battery compartment.
2.Press the ON/OFF button [see Fig. 1 (3)] to turn the torch on or off.
Warning
•Included batteries must be charged prior to first use.
•Charge only
•Batteries may leak or explode causing personal injury if inserted improperly, disposed of in fire, mixed with other battery types, or short circuited.
Features
•Recharges 4 pieces high capacity AAA
•Recharges 4 pieces high capacity AAA
•Recharges 4 pieces high capacity AAA
•Power up your Digital devices using this charger (such as mobile phone, iPod, MP3, MP4, PDA/ DV/ DC/ PSP) please see table A for compatible mobile phones
•Power up your Digital devices using the Car adaptor (Accessory no.5) or Power up USB devices using the AC adaptor (Accessory no.6)
•High Quality LED torch
•Batteries life well protected by timer.
•
•Special design LED indicator :GREEN LED flashing - Rapid charge; GREEN LED light ON – trickle charge
Safety Features
•Negative Delta V
•Safety timer to prevent over charge
•Short circuit protection
•
Charging your USB devices
(with AC adaptor - Accessory no. 6)
1.Before using, check the USB device’s input voltage and the AC adaptor’s output voltage to see if they match. Make sure the total loading does not exceed the rated output current of the AC adaptor.
2.Choose a suitable connector (either Accessory no.4 or no.7) and connecting USB cable (Accessory no.2). Connect the USB cable to your digital device and the DC output of the adaptor.
3.Plug the AC adaptor into household electric outlet
4.Switch on your Digital device.
Charging your USB devices (with DC adaptor - Accessory no. 5)
1.Before using, check the USB device’s input voltage and the DC adaptor’s output voltage to see if they match. Make sure the total loading does not exceed the rated output current of the DC adaptor.
2.Choose a suitable connector (either Accessory no.4 or no.7) and connecting USB cable (Accessory no.2). Connect the USB cable to your digital device and the DC output of the adaptor.
3.Plug the large end of the cord into the 12V car lighter power socket and the LED indicator will light instantly.
4.Switch on your Digital device.
Fuse Replacement for DC adaptor To check or replace fuse, simply rotate the plastic tip at the end of the adaptor counterclockwise.Visually inspect fuse element. If blown or if you are unsure, replace fuse (1AMP).
Important Safety Instructions
1.Before charging, read instructions
2.This charger is intended for use with
3.Do not expose charger to rain or moisture. For indoor use only.
4.Remove from mains when not in use.
5.Never use an extension lead or any attachment not recommended by manufacturer, otherwise this may result in a risk of fire, electric shock or injury to persons.
6.Do not operate the charger if it has been subjected to shock or damage. Take it to a qualified serviceman for repair.
7.Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire.
8.Unplug the charger from outlet before attempting any maintenance or cleaning.
9.This power unit is intended to be correctly orientated in a vertical or floor mount position.
10.The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
11.Before scrapping your charger, remove the batteries from the unit and ensure that they are disposed of safely.SAVE THESE INSTRUCTIONS. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
