After washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Cleaning the lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using
1.Take off the lint filter |
|
|
Pull up the lint filter on the agitator |
| Press |
to remove. As shown in Figure 1. | Press | |
2.Removing lint |
|
|
Press the lint screen clip with your |
| Figure 2 |
thumb and index finger, and get the |
| |
|
| |
screen downward as shown in Figure |
|
|
2. While wet, remove the lint on the |
|
|
screen in water. |
|
|
3.Mounting the lint filter |
|
|
After cleaning, mount the screen back |
|
|
onto the lint filter as shown in Figure 3. |
|
|
Then put the lint filter back in the agitator | Lint Screen | |
barrel. |
|
|
Figure 3
Lint filter
Pull up out
Agitator
Figure 
The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
Petro | l | Thinner |
| Alcohol |
|
|
|
|
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the water completely after
each using.
3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.
15
