SIIG 04-0263E manual Hardware Installation, Verify Driver Installation

Hardware Installation

General instructions for installing the card are provided below. Since the design of notebook computers vary, refer to your system reference manual for further information, if needed.

1.Power off your notebook computer and any other connected peripheral devices.

2.Insert the PC Card into the CardBus Type II slot of your notebook computer with its 68-pin connector facing the slot. Make sure it is inserted all the way in for a solid connection.

3.Power on your notebook computer.

Driver Installation

This section will guide you through the installation of your FireWire 3-Port CardBus.

Windows2000/XP/Server2003/Vista

Windows 2000/XP/Server 2003/Vista will automatically detect and install the correct driver for the FireWire (1394a) host adapter.

Verify Driver Installation

1.Right click My Computer, then click Manage. Click Device Manager.

2.Double click 1394 Bus Controller or IEEE 1394 Bus host controllers option.

3.IEEE 1394 Host Controller should be displayed.

3