Ulead VideoStudio Software Installation
TheFireWire 3-Port Cardbus includesUlead® VideoStudioTM digital video editing software for producing home videos, complete with attractive titles, transitions and sounds. Before installing VideoStudio, make sure your adapter and DV camcorder are properly installed and configured. See next section, Connecting DV Camcorder, for more details on how to properly install your DV camcorder.
1.Insert the Ulead VideoStudio DV software CD. Auto-run should start automatically. If not, click Start, Run, type X:\Autorun.exe, then click OK. (Replace X: with the drive letter of your CD-ROM)
2.Choose Install Ulead VideoStudio and follow the onscreen instructions to complete the installation.
Note: For instructions on how to use Ulead VideoStudio, please refer to VStudio.pdf file located in the Document\Manual directory on the Ulead VideoStudio DV editing software CD.
Connecting a DV Camcorder
Before setting up the digital video camcorder, verify the FireWire 3-Port CardBus driver has been successfully installed in your system, then follow the procedures below.
1.Boot up your system.
2.Connect the 4-pin connector of the provided FireWire (1394a) DV cable to your camcorder.
3.Connect the 6-pin connector to the FireWire (1394a) port.
4.Power on the camcorder. The camcorder should now appear in Device Manager.
