SIIG 04-0341D manual To Verify Windows ME / 98SE / 98 / 95 Installation, Windows NT

5.Repeat steps 1-4.

6.Restart Windows to complete the installation.

Windows 95

1.At the Update Device Driver Wizard, click Next.

2.Insert the driver CD, click Other Locations.

3.Type in D:\9x, click OK, then click Finish. (Change D: to match your CD/DVD-ROM drive letter)

4.From the Insert Disk window, click OK. When the Copying Files dialog box pops up, type in D:\9x, then click OK. (Change D: to match your CD/DVD- ROM drive letter)

5.Restart Windows to complete the installation.

To Verify Windows ME / 98SE / 98 / 95 Installation

1.Right click My Computer, click Properties, then click Device Manager.

2.Double click Ports (COM & LPT), CyberSerial PCI 16Cxxx... should be displayed two times.

3.Double click Multi-function adapters, SIIG CyberPro 2S... and PCI Function should be displayed.

Windows NT 4.0

1.From the desktop click Start, then Run.

2.Insert the driver CD, type in D:\NT4\Install_serial.exe, then click OK. (Change D: to match your CD/DVD-ROM drive letter)

3.Click Next when the Welcome window appears.

4.Select Install, then click Next.

8