Windows NT 4.0
1.From the desktop click Start, then Run.
2.Insert the driver CD, type in D:\NT4\Install_serial.exe,thenclick OK. (Change D: to match your
3.Click Next when the Welcome window appears.
4.Select Install, then click Next.
5.Click Yes, then click Exit.
6.Restart Windows to complete the installation.
To Verify Windows NT 4.0 Installation
1.Click Start, Settings, Control Panel, double click Ports device icon.
2.Four new COM ports will be assigned when successfully installed.
Windows2000
1.At the Found New Hardware Wizard, click Next.
2.Select Search for a suitable driver for my device (recommended), and click Next.
3.Check Specify a location, uncheck the other boxes, and click Next.
4.Insert the driver CD, type in D:\2000, then click OK. (Change D: to match your
5.Click Next and Finish.
6.Repeat steps
7.Restart Windows to complete the installation.
6
