SIIG 04-0600A manual Self-TappedMounting, Back 1/4-20x 1/2 Speaker Machine Screw 4-Hole

Back

1/4"-20 x 1/2"

Speaker

Machine Screw

4-Hole

Orientation

2-Hole Orientation

Figure 5

Self-Tapped Mounting

1.Locate the optimum location for the mounting plate and use it as template to mark the drilling locations. Do not drill or screw into the speaker where you could possibly damage the internal components.

2.Drill the pilot hole(s) using a 1/8" drill bit. The holes(s) should not be drilled more than 1/2" depth, see Figure 6 on the next page.

7