SIIG 04-0629A manual Driver Installation, Windows 7 32-/64-bit, Windows Vista 32-/64-bit

Driver Installation

This section provides information on how to install the 2S1P Combo-Valuedrivers. Please make sure the board is installed before proceeding.

Windows 7 (32-/64-bit)

1.Install the board and boot up Windows.

2.Right click Computer, click Manage, click Device Manager.

3.Insert the driver CD. Right click PCI Parallel Port, click Update Driver Software.

4.Click Browse my computer for driver software.

For 32-bit: Type D:\32bit, then click Next. (Change

D:to match your CD-ROM drive letter)

For 64-bit: Type D:\64bit, then click Next. (Change

D: to match your CD-ROM drive letter)

5.At Windows has successfully updated your driver software, click Close.

6.Right click PCI Serial Port, click Update Driver Software.

7.Repeat steps 4-5.

8.Right click PCI Serial Port, click Update Driver Software.

9.Repeat steps 4-5to complete the installation.

Windows Vista (32-/64-bit)

1.Install the board and boot up Windows.

2.Insert the driver CD. At the Found New Hardware window, insert the driver CD, click Locate and install driver software (recommended), then click Continue.

4