SIIG 2S manual PackageContents, Layout, Jumper Settings JP1, JP2

PackageContents

•CyberPro PCI 2S board

•2-port fan-out cable

•Low profile bracket (Dual Profile board only)

•Driver CD

•Quick installation guide

Layout

Full
profile
bracket*	JP2 (Serial port 2)

Fan-out cable connector (25-pin)

JP1 (Serial port 1)

Figure 1. Layout

*Note: Depending on the model purchased, the bracket size will be either Full or Low profile.

Jumper Settings (JP1, JP2)

Open = 0 volts (default)

Short 1-2 = 5V

Short 2-3 = 12V

Note: Most serial devices do not require additional power through the serial port. Refer to your serial device's manual for more information.

2