SIIG TV Mount Display Plate Installation, Final Installation, Maintenance

Concrete/Brick Wall Installation

1Place the wall plate against the wall and mark four locations to be used for mounting the wall plate.

2Pre-drill four holes at the positions you've marked and insert one concrete anchor

(B) into each hole.

3Position the Wall Plate onto the wall again and insert the bolts (A) and large washer (D) into the anchor as shown (figure 1-b) and tighten.

Step 2: Display Plate Installation

1Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display.

2According to the size of the display's hole, choose the corresponding screw (E/F/G) and small washer (C) and insert into the hole as shown (figure 2-a) and tighten.

Step 3: Final Installation

1Hang the display plate onto the top of the wall plate and slide it onto the wall plate as shown (figure 3-a).

Maintenance

Check the mounting screws every two months for tightness.

IMPORTANT: If you don't understand the installation instructions, please consult an installation specialist