© 2008 Silicon Imaging, Inc Page 21
6. Press “Okay” to close the TCP/IP properties window.
7. Next Press “Okay” to close the “Local Area Connection Properties” window. This will reset the
NIC and the IP address of the NIC.
8. Right click-again to re-open the “Local Area Connection” by selecting the “Properties” setting
again.
9. Click on the “Configure” button and then in the driver settings window select the “Advanced
Tab”.
10. Click on the “Jumbo Packets” property and select the 9K packet size.
11. If you NIC provides these properties, next select the “Receive Buffers” property and set the
number of buffers top 512.