Silicon Image SSD-C08G(I)-3600 manual Configuration and Status Register 202h

ATTRIBUTE MEMORY DESCRIPTION AND OPERATION SSD-CXXX(I)-3600 DATA SHEET

CONFIGURATION AND STATUS REGISTER (202H)

The Configuration and Status Register (CSR) informs the host of any status changes with regard to power-down.

Table 23: Configuration and Status Register (202h)

Operation	D7	D6	D5	D4	D3	D2	D1	D0
Read	Changed SigChg		IOis8	0	0	PwrDn	Int	0
Write	Changed	SigChg	IOis8	0	0	PwrDn	Int	0
Default	0	0	0	0	0	0	0	0
Value

Bit(s)	Description
Changed	Indicates that either CREADY (D5) or CWPort (D4) of the Pin
	Replacement register is set. Additionally, this bit changes state
	as the Powerdown (D2) bit changes.
SigChg	Outputs the inverse state of the Changed bit to the hardware
	interface signal STSCHG# at the card interface.
Iois8	Informs the host of the valid data bus width for the operations in
	progress:
	• 0 = 16-bit data transfer
	• 1 = 8-bit data transfer
PwrDwn	Indicates the state of the Card, which is either operating -0 or
	powerdown mode 1. During powerdown mode, no commands
	are accepted. Additionally, the host may not initiate a
	powerdown request when the card is busy via the Status
	register or the Hardware RDY/BSY pin.
Int	Indicates the inverse of the IREQ# status signal.

SILICONSYSTEMS PROPRIETARY

This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.

All unauthorized use and/or reproduction is prohibited.

3600C-04DSR PAGE 37 FEBRUARY 2, 2009