![](/images/new-backgrounds/1304218/30421823x1.webp)
DEPTH TH52 | English |
6 CONNECTION TO INSTRUMENT/CONTACTS
The depth transducer connects to the
The transducer cable is clearly marked with No 2 and the colours will correspond to input screw terminal on the Server.
IMPORTANT! DO NOT CUT OR EXTEND THE 8 M TRANSDUCER CABLE!
7 Calibration
Calibration is carried out in the Multi Control instrument (see manual).
8 Maintenance
8.1Antifouling Paint
Surfaces exposed to salt water must be coated with
8.2Cleaning
Aquatic growth can accumulate rapidly on the transducer’s surface, reducing its performance within weeks. Clean the surface with a soft cloth and mild household detergent. If the fouling is severe, use a stiff brush or putty knife to remove the growth taking care to avoid making scratches. Wet sanding is permissible with fine grade wet/dry paper.