Silvercrest KH 2131 Troubleshooting, Malfunction causes and remedies, Troubleshooting

Troubleshooting

WARNING

►Repairs to electronic devices may only be carried out by specialists who have been trained by the manufacturer. Considerable danger to the con- sumer and damage to the device can occur as a result of incorrect repairs.

Malfunction causes and remedies

Defect	Possible cause	Solution

	The transmitter or receiver	Switch the transmitter or receiver on
	is not switched on.	with the On/Oﬀ switch	2 resp. 14.
	The signal source	Switch the signal source on and,
	(e.g. DVD player) is	Switch the signal source on and,
	(e.g. DVD player) is	if necessary, start playback.
	not switched on	if necessary, start playback.
	not switched on
No audio/video	The transmitter and receiver	Select the same channel on the trans-
No audio/video	are not adjusted to the	mitter and receiver with the channel
transmission	same channel.	selector switch 5 resp. 17.
	The transmitter or receiver	Check the Cinch and AV connections
	The transmitter or receiver	on the connected devices as well as
	are not connected properly.	on the connected devices as well as
	are not connected properly.	on the transmitter and the receiver.
		on the transmitter and the receiver.
	The transmission range is	Reduce the distance between the
	reduced because of thick	Reduce the distance between the
	reduced because of thick	transmitter and the receiver.
	walls or ceilings.	transmitter and the receiver.
	walls or ceilings.
	The transmitter and receiver	Change the alignment of the
	are not aligned with each	Change the alignment of the
	are not aligned with each	transmitting antenna	resp. 13.
	other.	transmitting antenna	resp. 13.
	other.
Poor transfer quality	There are possibly other	Change the channel setting on the
	There are possibly other	transmitter and receiver. Ensure that
	radio devices in use on	transmitter and receiver. Ensure that
	radio devices in use on	the transmitter and the receiver have
	the same frequency.	the transmitter and the receiver have
	the same frequency.	the same channel setting.
		the same channel setting.
Disruptions in	The infrared transmitting	Aﬃx the infrared transmitting diode
Disruptions in	diode blocks the signal	Aﬃx the infrared transmitting diode
remote control	diode blocks the signal	slightly oﬀset to the signal source of
remote control	source of the infrared	slightly oﬀset to the signal source of
commands	source of the infrared	the infrared receiver.
commands	receiver.	the infrared receiver.
	receiver.

NOTICE

►If you cannot solve the problem with the aforementioned methods, please contact Customer Service.

KH 2131