Setting up and connecting
Disposal of the packaging
The packaging protects the device from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and reduces generated waste. Dispose of packaging material that is no longer needed according to the regionally established regulations.
NOTICE
►If possible preserve the device's original packaging during the warranty period so that in the case of a warranty claim you can package the device properly for return.
Requirements on the Installation Location
For the safe and
■Place the device on a firm, flat and level surface.
■Do not locate the device in a hot, wet or very humid environment or close to flammable material.
■The surfaces of furniture may contain components that could attack and weaken the rubber pads of the device. If necessary, place an
■The mains power socket must at all times be easily accessible, so that the power adapter can be easily and quickly removed if necessary.
Electrical connections
■Before connecting up, compare the connection data (voltage and frequency) on the type plate of the device with that of your power supply network.
This data must tally in order to avoid damage to the device.
■Check to ensure that the power cable of the device is undamaged and that it will not be laid over hot surfaces and/or sharp edges.
■Ensure that the power cable is not over taut or crimped/folded.
■Do not let the power cable hang over edges (trip wire effect).
NOTICE
►It is recommended that, in addition to switching the radio transmission set off, you disconnect the power adapter from the mains power supply or use switchable power strips. Only in this way can it be ensured that the device is fully switched off and a contribution made to the economical use of power.
GB
IE
KH 2131 | 7 |