Further setting possibilities
Setting the display brightness
Press the button LIGHT/DIMMER j repeatedly to set the brightness level at which the display should be illuminated. The brightness can be set at 3 levels.
Illuminated clamp strip
Documents, for example recipes, with a width of up to 10 cm can be inserted and automatically held in the clamp strip d. If you press and hold the button LIGHT/DIMMER j for two seconds, the downward facing lamp is switched on, which then illuminates the recipe. Press and hold the button j once again for two seconds to switch the lamp off.
Kitchen timer
1.Press the button TIMER s.
2.Using the buttons UP/DOWN 1(/l, set the desired time interval (a time span between 1 minute and 23:59 h is possible). Pressing and holding one of the buttons changes the display in
Button M1 t = 5 min. (Indicator = T1) Button M2 y = 10 min. (Indicator = T2) Button M3 u = 15 min. (Indicator = T3) Button M4 i = 20 min. (Indicator = T4)
3.Press the button TIMER s once again to start the kitchen timer. In the display r a clock icon running in reverse and a cooking pot symbol appears.
4.From 30 seconds before expiry of the time span an acoustic signal sounds, repeating at shorter intervals the closer the set time approaches. When the time has expired, the alarm sounds continuously and with increasing volume.
5.Press the button TIMER s to terminate the acoustic signal.
Interrupting the kitchen timer.
•To interrupt the kitchen timer, switch to the kitchen timer mode by pressing the button TIMER s.
•Then briefly press the button TIMER s to interrupt the kitchen timer.
The time is halted, the indicator blinks for 10 seconds. After this period the appliance returns to automatic modus. To restart the kitchen timer, briefly press the button TIMER s again to switch back into the kitchen timer mode.
- 10 -