Warning:
Under no circumstance should you use receptacles made of glass or other very fragile/easily breakable materials. These containers can be damaged and then cause potentially serious injuries.
9.Insert the plug 3 into a mains power socket.
10.To set the mixer into motion, push the speed switch 1 to the desired speed setting. You can select between 5 speed settings or the turbo button 0 (see section "Speed levels").
Warning:
Do not operate the mixer for longer than 10 minutes in one session. After 10 minutes, allow the appliance to rest until it has cooled itself down.
12.Press the release button 4 to remove the hand mixer and the ejection button q to release the whisks e or the kneading hooks r.
Note:
For safety reasons, the whisks e or the dough hooks r can only be released when the speed switch 1 is in the position "0" or " 
" shows.
Blending
Warning:
Never use the blender w for hard foodstuffs such as: coffee beans, ice cubes, sugar, cereals, chocolate, raw/hard vegetables etc. They could cause serious damage to the appliance.
Note:
If ingredients become stuck to the side of the mixing bowl 7 and they cannot be captured with the kneading hooks r/ whisks e, switch the hand mixer off. Remove the lid 9. Use the dough scraper t to push them back into the middle of the mixing bowl 7. Replace the lid 9. Switch the hand mixer back on.
11.To remove the bowl contents, switch the appli- ance off. Pull the lid 9 to the side and remove it. Press the release button for tilting 5, lift the holder upwards and remove the mixing bowl 7 from the mixing stand 6.
Note:
In the case of larger amounts in the mixing bowl 7, it is to be recommended that you first remove the mixer from the holder.
Warning:
Under no circumstance should you use receptacles made of glass or other very fragile/easily breakable materials. These containers can be damaged and then cause potentially serious injuries.
1.Open the fixture for the blender 2 and hold the safety cover 2 firmly.
Note:
The blender w can only be utilised when the whisks e or the kneading hooks r are not installed.
2.Insert the blender w until it engages and then twist it firmly tight.
3.To avoid overflows, the container used for blending should only be filled to 2/3rds of its capacity. Select a sufficiently large container.
Tips:
•To ensure an effective blending of the ingredients, the foodstuffs to be processed should cover at least the lower section of the blender w.
•First switch the hand mixer on when the blender w has been inserted into the ingredients to be blended.
- 5 -
