Handling and operation
Programming the wake time and method
When programming the alarm times, you can select whether, at the programmed time, alarm tones should sound or the radio should start playing. Two different alarm times (Alarm 1/Alarm 2) can be programmed.
♦Press and hold the AL1 button 16 or AL2 button 15. In the display 2 the hour indicator blinks.
♦Press or hold down the UP button 12 or DOWN button 10 to set the hour.
♦Press the AL1 button 16 or AL2 button 15 again. In the display 2 the minute indicator blinks.
♦Press or hold down the UP button 12 or DOWN button 10 to set the minutes.
♦Press the AL1 button 16 or AL2 button 15 again. The set wake time is accepted and in the display 2 appears the wake method indicator.
♦Press the UP button 12 to set the desired wake method (
=
Alarm tone or 
= Radio).
♦Press the AL1 button 16 or AL2 button 15 again to accept the setting.
NOTICE
►If you want to be awakened with the radio, apart from the wake time programming you must also set, additionally, the desired radio station and volume (see section Radio operation).
GB
IE
SRD 250 A1 | 13 |
