Items supplied
Tabletop Freezer
Ice cube mould
Operating instructions
Description of the appliance
1 "Super Freeze" control lamp (yellow)
2 Temperature control lamp (red)
3 Operational control lamp (green)
4 "Super Freeze" switch
5 Temperature regulator
6 Adjustable feet
7 Storage compartments
8 Freezer compartments 
Setting the appliance up
Note
While setting the appliance up, and also later should you want to relocate it, do not slope it by more than 45 °.
Ventilation
In order not to impede the heat exchange, and to ensure high cooling efficiency with low power con- sumption, a free space of 50 mm should remain above the appliance. Should this not be possible, then at least a space of 25 mm on each side of the appliance.
Laying and connecting the power cable
Connect the appliance via the power cable with a properly connected and earthed 230 V mains power socket. Do not use extension cables or multi- plug sockets. It must at all times be possible to dis- connect the appliance from the mains power supply by simply removing the plug from the mains power socket. Route the power cable so that it does not make contact with the compressor of the appliance. This becomes hot during operation and could da- mage the insulation of the cable. Also ensure that the cable does not come under the adjustable feet 6 or is in any way clamped and, because of this, could be damaged.
Protect against moisture and heat
Place the appliance in a dry and well ventilated room. The appliance is not suitable for operation outdoors. Protect the appliance from direct sunlight and do not place it near sources of heat such as stoves or radiators, etc.
Installation of the appliance
Ensure that the freezer is positioned horizontally on a stable surface. It works properly only in this position. Check that it is horizontal with a spirit level. To make any corrections, you can screw the the adjustable feet 6 in or out. All adjustable feet 6 must have solid contact to the undersurface so that the appliance stands firmly.
Attention!
To avoid the risk of fire, do not place electrical heaters on the freezer. Also, do not place kettles or water boilers on it, as overflowing boiling liquids could damage the electrical insulation of the appliance.
- 4 -
