18
C3X Lumis HOST
The main page displays all the source inputs physically con-
nected to the projector.
You can delete any inputs which are not in use. To do this,
select the input in the pull down menu which appears when
you press ◀, and choose whether to enable or disable the
input. Enabling or disabling of sources will automatically
cause the renumbering of the remaining active inputs.
Active video signal sources (shown in the input selection
menu) are ticked. It may be useful to identify the input with a
user defined name rather than the type of signal (for example,
with the name of the connected device).
When you have decided to display an input, select NAME
in the pull-down menu and rename the source currently in
use. This makes it easier to remember which source is con-
nected to a given input; you can use up to 12 alphanumeric
characters for the name (for further details, see ENTERING
TEXT).
Entering text
The text entry menu makes it possible to enter text quickly
and easily.
Text input mode is the same whether you are editing an exist-
ing name or entering a name for the first time. Characters can
be entered in any of the available positions (represented by
horizontal lines). Use the ◀ and ▶ keys to move the cursor
left or right respectively.
Press the number key corresponding to the character ;
pressing once selects the first character, twice, the second
character and so forth. The available characters are shown
in the text entry menu that appears in this setup mode. Once
you have entered a character, move to the next space on the
right to enter the next with the ▶ key on the remote control,
and repeat the procedure. This applies even if the letter is
associated with the same key as before. Use the ▲ key to
switch from upper case to lower case characters and vice
versa. Cancel errors with ▼ after selecting the character to be
cancelled. Once you have completed the text entry procedure
confirm your text and save it by pressing the MENU+ key on
the remote control. If you wish to cancel the changes, press
MENU- on the remote control.
F2 with the keys ◀ and ▶ on the remote control; select the
function to assign to F1 or F2 with the keys ▼ and ▲.
The function performed by the key is confirmed by the
appearance of a dot on the corresponding column-row
intersection.
Zoom
Controls the motorised lens zoom, permitting you to zoom
in or out, enlarging or shrinking the projected image. By
pressing the • button on the remote control next to the
menu (zoom/focus) you can display a pattern that aids zoom/
focus operations.
This permits you to access the optic zoom control, where
the ◀ and ▶ keys zoom in and out.
Focus
When selected, the ◀ and ▶ keys adjust the focus.
Magnification
Activates the electronic zoom, the keys ◀ and ▶ zoom in
on the image. If you press the key again you will enter PAN
mode in which the ◀ and ▶, ▼ and ▲ keys enable you to
pan over the enlarged image. When the ▼ key is pressed a
third time, the system resets the projector to original view-
ing settings.
Blank
Switches off the video signal and displays a blank screen.
As soon as the key is pressed an OSD message lasting a
few seconds confirms that the function has been activated.
You can restore the previous conditions by pressing any key
on the remote control.
Gamma correction
Successive pressing of the key in question (F1 or F2) makes
it possible to select any of the available gamma curves.
_ _ _ _ _ _ _ _ _ _ _
()?@
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
7
TUV
8
0
WXYZ
9
PQRS
Input List / Rename Input
Cancel
Confirm
+
-
SOURCE INFORMATION
When enabled (YES) each time the source is changed in-
formation regarding the signal type is displayed. If disabled,
(NO) no information on the source is displayed.
OSD BACKGROUND
Determines the type of background for the On Screen Display
(opaque or transparent).
F1-F2 KEYS
The remote control is equipped with two keys (F1 and F2)
which are associated with various different functions (Fig
31). The screen has six options, one for each line, and two
columns indicating the keys F1-F2. You can select F1 and
Menu
Source list
F1/F2 Keys
Source info
OSD Backgroung
OSD Position
OSD Timeout
Language english
Zoom
Focus
Magnification
Blank
Gamma Correction
F1 F2
C3X Lumis HOST_ EN.indd 18 11-02-2009 14:40:35