Sim2 Multimedia C3X Link specifications Get Codes

21 22

00 00

23 24 25 26

00 00 00 00

SIM2 C3X LINK

RS-232C CONTROL SPECIFICATIONS

27 28 29 30 31 32

00 00 00 00 00 00

Get Codes

Get Commands may be used to get the current value of projector parameters.

The response to a correct Get Command consists of 33 byte packet, where Byte Number 11 contains the Validation Code (01) and bytes Number 17 and Number 18 the requested value (the least-significant byte of the value being sent first). Of course CRC (bytes number 6 and 7) has been altered accordingly.

0	1		2		3			4			5		6			7
1E	BE		EF		Packet Type				Packet Payload Size					Packet Checksum (CRC)
8	9	10		11		12	13		14	15		16		17	18		19
Op Type	Op ID			01		00	Op Target			00		00		Req Value			00

20

00

21 22 23 24 25 26 27 28 29 30 31 32

00

00

00

00

00

00

00

00

00

00

00

00

Get Codes:

	BE EF 03 19 00 52 2A 02 00 08 00 00 00 00 00 00																(1)
BRIGHTNESS
	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
	BE EF 03 19 00 C7 77 02 01 08 00 00 00 00 00 00																(1)
CONTRAST
	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
	BE EF 03 19 00 38 93 02 02 08 00 00 00 00 00 00																(2)
COLOR
	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
	BE EF 03 19 00 AD CE 02 03 08 00 00 00 00 00 00																(3)
TINT
	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
	BE EF 03 19 00 9D 0B 02 C2 09 00 00 00 00 00 00																(4)
COLOR TEMPERATURE
	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
	BE EF 03 19 00 13 25 02 27 08 00 00 00 00 00 00																(5)
GAMMA
	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
	BE EF 03 19 00 5E D5 02 27 09 00 00 01 00 00 00																(6)
MEMORY
	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00

12