14
8 REMOTE CONTROL
Insert the batteries, taking care to match the polarity, as
indicated in the battery recess of the remote

(Fig. 26)

.
+-
+-
+
-
+
-
four 1.5V
AAA alkaline
batteries

Fig. 26

Change the batteries in the remote control if experiencing
difficulty in sending commands to the projector.
If the remote control is not to be used for a long period of time
remove the batteries. Replace all batteries at the same time;
do not replace one new battery with a used battery. If the
batteries have leaked, carefully wipe the case clean and replace
with new batteries.
The remote control sends commands to the projector via
infrared signals.
It is possible to control the projector by pointing the remote
control at the screen; the sensor at the front of the projector will
pick up the reflected infrared commands.

(Fig. 27)

.
C-SYNC
DVI

Fig. 27

Avoid placing obstructions between the remote control and the
infrared sensor at the front of the projector; this will impair the
remote control performance.