Sima Products SCC-2 user manual Introduction, Warnings and Safety information

SFX-9 Video Mixer

Introduction

Introduction

Congratulations on your purchase of Sima’s Color Corrector Model SCC-2. This product is designed to make adjustments to video signals while making copies. The SCC-2 allows you to adjust the brightness, contrast, color, sharpness and NTSC Tint. It features composite and s-video inputs and outputs.

FCC and Maintenance information

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.Re-orient the receiver.

2.Relocate this equipment with respect to the receiver.

3.Move this equipment away from the receiver.

4.Plug this equipment into a different outlet so that the equipment and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful. “How to Identify and Resolve Radio-TV Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock No. 004-000-00345-4.

Warnings and Safety information

Safety Check list

Only a qualified service person should remove the cover or attempt to service this device. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Never make or change connections when the power is still switched on To prevent the risk of electric shock, do not remove the cover (or back). No user- serviceable parts inside. Please refer to important operating and maintenance (servicing) instructions in the literature accompanying this appliance

Read these instructions and keep them for future reference. Heed all warnings and follow all instructions.

Do not use this apparatus near water. Clean only with a damp cloth.

Do not install near any heat surfaces such as radiator, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plug’s convenience receptacles, and the point where they exit from the apparatus.

Unplug this apparatus during lightening storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Service is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, if liquid has been spilled or an object has fallen into the apparatus or the apparatus has been exposed to rain or moisture, has been dropped, and does not operate normally.